In order to run Mailjam, you have to run the different components, depending on what you want to do. Basically, you will need to run a server (Mailjam daemon) all the time, then you will need one MTA client per mailing list.
Ocasionally, you will need to add or delete a mailing list, or edit its information, members list, etc. To do that, you will have to run a Mailjam client (either the CLI client or the Web client).
Keep reading if you want to learn more about the way you can start each component, the different arguments/parameters you can provide on startup, etc.
Warning
Remember that, before being able to run any component, you have to set up proper configuration files. You can learn more about Mailjam configuration files in the configuration files documentation.
Contents
First component you should start is the Mailjam daemon. It is quite easy, just run this command from a shell/console:
mailjam-server
The server process will read the mailjam.conf configuration file, will prepare everything and will start listening for XMLRPC requests on localhost:9876
Warning
localhost:9876 is the default value provided by the default configuration files. If you have modified that, it will be a different address:port combination.
Warning
If you didn’t add a valid configuration file to one of the default paths, the server will refuse to start, giving you an error message.
Warning
As of the current version of Mailjam, there are no pre-made init scripts that can handle the start/stop/restart of the daemon, but those will be added in one of the future releases.
You can pass some parameters to mailjam-server to modify the behaviour of the daemon or get more information.
Note
Remember that the proper way to modify the behaviour of the daemon is editing its configuration file, mailjam.conf
You can get some help by passing the -h or –help parameters:
mailjam-server -h
mailjam-server --help
You can set the path to the config file the server will load on startup, passing the -c or –config parameters:
mailjam-server -c /home/mailjam/mailjam.conf
mailjam-server --config /home/mailjam/mailjam.conf
Warning
If the file does not exist, or if it is not a valid configuration file, an error will be shown and the daemon will refuse to start.
Once you have your daemon running, you have to add as many MTA clients as mailing lists you want to manage to your mail server.
Edit your mail server aliases file [1] (probably /etc/aliases or /etc/mail/aliases) and add an entry like:
list@mydomain.com: "|/usr/local/bin/mailjam-mta -a list@mydomain.com -i -"
Warning
replace list@mydomain.com with the real address of your mailing list
Warning
replace /usr/local/bin/mailjam-mta with the real path to your mailjam-mta installation
Rebuild your aliases database:
newaliases
Warning
Refer to your OS documentation to see how you can rebuild aliases. In most unix-like systems it is done by the newaliases [2] command.
When new messages arrive at your mail server for your mailing list address (let’s use the example address list@mydomain.com) one of the steps in the process that checks the message, it’s origin, destination, contents, etc is the step where the mail server checks its internal aliases database, that is, a list of special addresses that, instead of being real addresses, they are related to some other addresses in some way.
Most MTAs out there support one very convenient feature that is to pipe the contents of the message (headers and body) to a given shell command. That means that the all the received data will be sent to an external command for it to process such data.
Here is where mailjam-mta comes in.
What you have to do is just tell your mail server that all messages with destination list@mydomain.com (to keep using the same example address) will be piped to mailman-mta. The Mailjam MTA client will then know what to do with the message, performing some checks and re-sending it to the proper destinations (the members/suscriptors of the given mailing list).
So, first thing you have to find out is where is your aliases file?.
In unix-like systems, like the different Linux distributions or the different BSD flavours, that file is /etc/mail/aliases or /etc/aliases (usually one is a simbolic link to the other).
Note
Usually the aliases file contains some lines like:
MAILER-DAEMON: postmaster
postmaster: root
Once you’ve found out where the file is, edit it and add this line to the bottom of the file:
list@mydomain.com: "|/usr/local/bin/mailjam-mta -a list@mydomain.com -i -"
Warning
replace list@mydomain.com with the real address of your mailing list
Warning
replace /usr/local/bin/mailjam-mta with the real path to your mailjam-mta installation
There you are telling your mail server that any message coming to list@mydomain.com will be passed to the mailjam-mta command, passing some parameters to it:
Once you’ve added that line to your aliases file, you have to rebuild your aliases database:
newaliases
Warning
Refer to your OS documentation to see how you can rebuild aliases. In most unix-like systems it is done by the newaliases [2] command.
And you are done. Everything is ready now.
You can pass some parameters to mailjam-mta to modify the behaviour of the client or get more information.
Note
Remember that the proper way to modify the behaviour of the client is editing its configuration file, mailjam-mta.conf
You can get some help by passing the -h or –help parameters:
mailjam-mta -h
mailjam-mta --help
You can set the path to the config file the client will load on startup, passing the -c or –config parameters:
mailjam-mta -c /home/mailjam/mailjam-mta.conf
mailjam-mta --config /home/mailjam/mailjam-mta.conf
Warning
If the file does not exist, or if it is not a valid configuration file, an error will be shown and the client will refuse to start.
You can check the version of the mailjam client you are trying to run by passing the -v or –version parameters:
mailjam-mta -v
mailjam-mta --version
This parameter is required (you have to provide it with a value in order to run the mailjam-mta). It sets the address of the mailing list managed by this MTA client instance.
The MTA client will use the provided value to do some checks on the daemon, retrieving all the needed data to perform its tasks.
You can pass a valid address using both the -a and –address parameters:
mailjam-mta -a list@mydomain.com
mailjam-mta --address list@mydomain.com
This parameter tells mailjam-mta from where it has to read the message sent to the mailing list. That could be a local file (to be readed from disk) or a stream of data coming directly from the standard input (stdin).
For a regular configuration/setup, the second option is preferred, as the mail server will send the stream of data directly to mailjam-mta (as explained before):
mailjam-mta -i -
mailjam-mta --input -
But perhaps some time you would like to send (again) a message you have on disk, that could be done easily, passing the path to the file containing that message to mailjam-mta:
mailjam-mta -i /home/backups/mail/that-important-mail.txt
mailjam-mta -input /home/backups/mail/that-important-mail.txt